Windows 10 Thread Stuck in Device Driver Error [SOLVED]

Windows 10’s Thread Stuck In Device Driver problem is a Blue Screen of Death (BSOD) caused by a driver file stuck in an infinite loop. The stop error code, 0x000000EA, indicates that there may be a device driver rather than a hardware issue.

However, updating the BIOS or drivers is an easy fix for the error, and it often fixes it. If you cannot boot into Windows, use the installation media to boot your computer into safe mode to complete the instructions described below.

You may get any of the following errors on your PC:

• STOP THE THREAD STUCK IN THE DEVICE DRIVER
• THREAD STUCK IN DEVICE DRIVER error code 0xEA
• 0x000000EA is the value of the THREAD_STUCK_IN_DEVICE_DRIVER bug check.

The following are a few causes of the Thread Stuck In Device Driver error:

• old or faulty device drivers
• driver issue with the installation of new hardware.
• A broken video card is the cause of the error 0xEA blue screen.
• previous BIOS
• Poor Memory

Windows 10 Thread Stuck in Device Driver Error [SOLVED]

So, without further ado, let’s see how to use the troubleshooting guide below to fix the Thread Stuck In Device Driver Error in Windows 10.

Method 1: Update Graphic Card Drivers

The most likely reason for the Thread Stuck In Device Driver Error in Windows 10 is an out-of-date or defective graphics card driver. Installing a third-party app or updating Windows can destroy your system’s video drivers. To resolve issues like flickering on and off on your screen, improper display operation, etc., you might need to upgrade the drivers for your graphics card. With this article, updating graphics card drivers can be a simple solution if you have any such problems.

Method 2: Disable Hardware Acceleration

1. To access Settings, press Windows Key + I. Then, select System.
2. From the left-hand menu, select Display. Then, click the Advanced display options button at the bottom of the Display window.
3. Select the Troubleshoot tab and then press the Change Settings button.
4. Set the Hardware Acceleration slider to None.
5. Select Apply, click OK, and restart your computer.
6. To access the NVIDIA Control Panel, right-click on the desktop and choose it if the troubleshooting tab isn’t visible. Each graphic card has its control panel.
7. Choose “Set PhysX configuration” from the left column of the NVIDIA Control Panel.
8. A PhysX processor then confirms that the CPU is picked under choose.

9. To save your changes, click Apply. This will turn off GPU acceleration for NVIDIA PhysX.
10. Reboot your computer to try to fix the thread stuck in device driver error in Windows 10; if that does not work, move on.

Method 3: Run the SFC and DISM tool

1. Using the Windows Key + X keyboard shortcut, select Command Prompt (Admin).

2. Enter the following into the Command window and press Enter:
3. After the above process is complete, wait for your computer to restart.
4. Please resolve the Thread Stuck in device driver error in Windows 10; if not, move on.
5. Launch CMD once more, input the following commands, and press input each time:
6. Wait for the DISM command to complete its carrying out.
7. Try the following command if the previous one doesn’t work:

Note: Change the C:\RepairSource\Windows directory to point to the Windows installation or recovery disc location for your repair source.

7. To save changes, restart your computer.

Method 4: Perform Windows update

It is advised to upgrade Windows because an incomplete update might cause issues with the drivers.

1. To access Settings, press Windows Key + I. Then, select Update & Security.
2. Click the Windows Update option from the menu on the left.
3. Click the “Check for updates” option now to see whether any updates are available.
4. Select Download & Install updates if there are any pending updates.
5. Install the updates after downloading them, and your Windows will update.
6. To save changes, restart your computer after the updates have been installed.

Method 5: Run Windows 10 BSOD Troubleshooter

The included Windows Troubleshooter can resolve the Blue Screen of Death Error (BSOD) if you use Windows 10 Creators update or higher.

1. To access Settings, use the Windows key + I. Then, select “Update & Security.”
2. Choose the “Troubleshoot” option from the left pane.
3. Find and fix more issues in the sections by swiping down.
4. Select “Blue Screen” and then select “Start the troubleshooter.”

Method 6:Allow the Application to Access the Graphics Card

1. To access Settings, press Windows Key + I. Then, select System.
2. Select Display from the menu on the left, then click the Graphics settings link at the bottom.
3. Choose the app type. If your game or program isn’t in the list, choose the Classic app and then use the “Browse” option.
4. Locate your program or game, pick it, and press the Open button.
5. Click the program once it has been added to the list, then click Options again.
6. Click Save after selecting “High performance.”
7. To save changes, restart your computer.

Method 7: Update BIOS (Basic Input/Output System)

Note: Updating your BIOS is an important task that requires professional supervision because, if done incorrectly, it can cause severe damage to your system.

The BIOS, which stands for Basic Input and Output System, is software that exists on a tiny memory chip on your computer’s motherboard and is in charge of setting all other hardware, including the CPU, GPU, and other components. It serves as a conduit between the hardware and operating system of the computer, such as Windows 10. The Thread Stuck in the device driver problem might occur when an older BIOS cannot support new capabilities. You must upgrade the BIOS using this guide to address the underlying problem.

Method 8: Reset Overclocking Settings

If you are overclocking your PC, you may get a Thread Stuck-in device driver error. Overclocking software strains your PC’s hardware, causing it to restart unexpectedly and display the BSOD error. To resolve this problem, just reset the overclocking settings or uninstall any overclocking software.

Method 9: Faulty GPU

The GPU that came with your computer is likely faulty. To determine if this is the case, try turning off the dedicated graphic card and leaving the integrated one in place to see if the problem goes away. Whether the problem is fixed or not, your GPU is broken and needs to be replaced. However, you can try cleaning and reinstalling your graphic card on the motherboard to check whether it’s still functioning.

Method 10: Check Power Supply

Most of the time, Bluescreen of Death issues are caused by an improperly working or failing Power Supply. You might need to restart the computer multiple times before it can receive enough power from the PSU since the hard drive’s power demand is not being satisfied. If this is the case, you could have to install a new power supply or check by using a spare power supply.

If you recently added new gear, such as a video card, the PSU is likely unable to provide the graphic card with the power it requires. Simply remove the hardware for the time being to see whether that resolves the problem. If the problem is fixed, you might need to buy a higher-voltage power supply unit to utilize the graphics card.

That’s it—you’ve fixed the Thread Stuck in Device Driver Error on Windows 10! Please feel free to ask any further questions in the comments area.