Fix Physical Memory Dump Error in 6 Ways

The Blue Screen of Death (BSOD) error, a Stop error that stops you from using your computer, is caused by a Beginning Dump of Physical Memory. You will be stuck in this BSOD error loop each time you restart your computer, and the primary issue is that you won’t be able to access any files or data on the machine.

An example of a physical memory dump error is as follows:

In the event of an application or system crash, a memory dump is a process that shows and stores the memory contents. The following are possible causes of the Physical Memory Dump error: incorrect hardware and software, corrupted RAM, damaged hard drives, and corrupted system data.

Fix Physical Memory Dump Error

Method 1: Run Windows Diagnostics

To ensure that your hardware is in good working order, you must run Windows Diagnostic. Your hard drive may be corrupted or damaged; in that case, you’ll need to install Windows again and replace your old HDD or SSD with a new one. However, you must use a diagnostic program to determine whether you need to replace your HDD or SSD before making any decisions.

To begin the Diagnostics, restart your computer, hit the F12 key when the boot screen displays, select the Boot to Utility Partition or Diagnostics option, and then press enter to begin the Diagnostics. This will automatically inspect your system’s hardware and update you if any problems are discovered.

Method 2: Launch Check Disk (CHKDSK) and System File Checker (SFC).

• Again, using technique 1, you can open the command prompt by clicking on it in the Advanced options box.
• Enter the following lines into CMD, pressing Enter each time:

Note: Verify that you are using the drive letter that Windows is currently on.

• Close the command window and restart your computer.

Method 3: Run Memtest86+

Now, launch Memtest86+, a third-party program that works outside the Windows system, and eliminate any possible exceptions to memory faults.

Note: You must download and burn the software on a disk or USB flash drive, so be sure you have access to another computer before you begin. Memtest will likely take some time; therefore, it is better to leave the machine overnight.

1. Attach a flash drive via USB to your computer.
2. Get the Windows Memtest86 Auto-installer for USB Key and install it.
3. To extract the image file you downloaded, right-click on it and choose “Extract here.”
4. After extracting the folder, please open it and launch the Memtest86+ USB Installer.

5. To burn the MemTest86 software, select the USB disk that is plugged in (this will format your USB drive).
6. After completing the steps listed above, plug the USB into the computer that displays the Physical Memory Dump Error.
7. Restart your computer and confirm that the USB flash drive is the boot option.

8.Memtest86 will start examining your system for memory corruption.

9. You can be confident that your memory works correctly if you have passed every test.
10. Memtest86 will detect memory corruption if any of the stages are not successful, indicating that the reason behind your Physical Memory Dump problem, the blue screen of death problem, is defective or corrupted memory.

11.If defective memory sectors are discovered, you must replace your RAM to fix the Physical Memory Dump Error.

Method 4: Run Startup/Automatic Repair

1. Restart your computer after inserting the Windows 10 bootable installation DVD.
2. When asked to boot from a CD or DVD, press any key; to proceed, press any key.
3. Select the language you want to use and press the Next button. Then, click the bottom-left button to fix your computer.
4. Choose Troubleshoot from the Choose an Option screen.
5. Select the Advanced option on the Troubleshoot screen.
6. Select between Automatic Repair or Startup Repair from the Advanced Settings box.

7. Await the conclusion of the Windows Automatic/Startup Repairs.

8. If you’ve successfully fixed the physical memory dump error, restart; if not, continue.

Method 5: Run CCleaner to fix Registry errors

• Get a CCleaner and install it.
• Launch CCleaner now, and pick the following items to be cleaned from the “Cleaner” area under the Windows tab.

• Click Run Cleaner to let CCleaner do its thing after you’re sure that every requirement has been examined.

• Choose the Registry tab and make sure the following are checked to clean your system further:

• Click Fix Selected Issues after choosing Scan for Issue and letting the CCleaner finish its scan.

• When asked by CCleaner, “Do you want backup changes to the registry?” Choose “Yes.”
• Choose Repair All Selected Issues after your backup is finished.
• Try restarting your computer to see if that fixes the Physical Memory Dump Error.

Method 6: Repair Install Windows 10

This is the last option since, if everything else fails, it is certain to solve any PC issue. Repair Install uses an in-place upgrade to fix system problems without wiping out user data that is already stored on the machine. So read on to learn How to Fix and Install Windows 10 Easily.